On this page a list of M-Bus devices supported by the M-Bus driver can be found. This list is necessary because the M-Bus standard does not ensure that any device can be read with a unique implementation. The procedure to read the device may vary, different data coding is used, the delivered data can be specifically configured and some data coding are even manufacturer specific. Therefore, tests and adaptations might be necessary for some new devices to be supported by the M-Bus driver.
For simple application and standard devices, a set of Standard FBoxes has been created. If a standard FBox is sufficient, no specific implementation is required. For heating see the Generic FBoxes in the M-Bus Heating family. For simple water and gas meters, see the Generic FBoxes in the M-Bus Pulse/Water/Volume family. For electricity meters see the Standard FBoxes in the M-Bus Electricity family. Please refer also to the documents listed at the end of this document.
Note also that some devices from different manufacturers are internally identical. With a device specification Engiby can check if an existing FBox can be used.
The following list shows the devices that have been successfully tested by Engiby or by integrators.
Manufacturer / Provider |
Supported devices |
Type * |
FBox |
Library version |
ABB |
Heat counter, SVM F2 |
Heating |
ABB F2-F4 |
2.0.00 |
Actaris / Allmess |
Integral MK MaXX |
Heating |
Actaris MaXX |
2.5.003 |
Algodue |
EKA-AUB |
Electric |
Algodue EKA-AUB |
2.7.321 |
Aquametro |
AMTRON-NW |
Heating |
Amtron N&NW |
2.0.000 |
Berg |
Serie BLMi |
Electric |
Berg BLMi |
2.3.105 (tu) |
CS Instruments |
VA 400 |
Volume |
Generic Volume |
2.7.320 (tu) |
Danfoss |
EEM-C CALStreem |
Heating |
Danfoss EEM-C |
2.0.010 |
ELKO |
EIZ-EDW |
Electric |
|
2.1.027 |
Elster |
F96 Plus: see Hydrometer Sharky BR773 |
Heating |
Hydrometer Sharky BR773 |
2.6.102 (do) |
Eltako |
DSZ12DM |
Electric |
Saia AWD |
|
Elvaco |
CMa10 / CMa11 |
Sensor |
Elvaco CMa10/CMa11 |
2.7.314 (tu) |
EMH |
DIZ |
Electric |
ELKO DIZ |
2.7.200 (tu) |
EMU |
EMU 32.xx |
Electric |
Standard |
2.5.041 |
ENDYS | EAM 4L | Electric | ENDYS EAM | 2.7.200 |
Enerdis | UlysCOM M-Bus | Electric | Algodue EKA-AUB | 2.7.321 |
FAST FORWARD AG |
Fast Stromauge (EnergyCam) |
|
Single Value |
2.6.213 (tu) |
Finder |
7E.56, 3 phases |
Electric |
Saia AWD |
2.6.123 (do) |
FLONIDAN |
UNIFLO G4 EM |
Gas |
Generic Volume |
2.7.320 (tu) |
Gossen Metrawatt |
EMMOD206 for SINEAX A2xx |
Electric |
Metrawatt Sineax |
2.7.206 (tu) |
GMC |
Electricity, U1187 / U1189 |
Electric |
GMC U118x |
2.4.034 |
GWF |
EnerCal F2 |
Heating |
GWF EnerCal |
2.4.003 |
Honeywell |
EW5451A4100 |
Heating |
Hydrometer Sharky BR773 |
2.7.016 (tu) |
Hydrometer |
Hydrometer Scylar II |
Heating |
Hydrometer Scylar |
2.1.010 |
Ista |
Sensonic |
Heating |
Generic Heating |
2.5.200 |
Janitza |
B24 313-10J |
Electric |
ABB B23/B24 |
2.7.606 (tu) |
Kamstrup |
Maxical III |
Heating |
Kamstrup MaxiCal III |
2.3.105 |
Landis & Gyr |
Ultraheat T550 (UH50) |
Heating |
Generic Heating |
2.7.014 (tu) |
Maddalena |
MicroClima |
Heating |
SensoStar |
2.6.103 (do) |
Metra |
ERW 700 |
Heating |
Metra ERW 700 |
2.5.215 (tu) |
Metrona |
Ultraheat XL2 Hybrid |
Heating/Cooling |
Generic Heating Dual |
2.7.684 |
NeoVac |
Supercal SC 431 |
Heating |
NeoVac 431 |
2.1.013 |
NZR |
KM |
Electric |
NZR |
2.5.065 (do) |
Optec |
Digital 3/5 DT |
Electric |
Standard, Variant 1 |
2.5.041 (st) |
Paul Vaucher |
PV Optima |
Heating |
Generic Heating |
2.6.207 |
Relay |
PadPuls M1 |
Pulse |
Relay PadPuls |
2.1.021 |
Saia-Burgess |
AWD, 3 phases |
Electric |
Saia AWD |
2.6.123 (sa) |
Sappel |
HYDRUS |
Water |
Generic Volume |
2.6.123 (tu) |
Schlumberger |
CF 50 M-Bus-Interface |
Heating |
Schlumberger CF 50 |
2.0.000 |
Sontex |
502 S and SX850 F |
Heating |
Single value 1-4 |
2.5.209 |
Sensus/SPX |
SPX B 501 |
Heating |
Fix Data |
2.3.110 |
Schneider |
iEM 3xxx (ref. A9MEM3xxx) |
Electric |
Schneider iEM3000 |
2.7.704 |
Siemens / L&G |
Ultraheat / 2WR4 / 2WR5 / 2WR6 |
Heating |
Siemens 2WRx |
2.1.021 |
Socomec |
Countis E25, E26, E35, E36, E45, E46 |
Electric |
Countis E2x/4x |
2.7.682 |
Techem |
Delta-tech Split |
Heating |
Techem Split |
2.0.022 |
Viterra Energy Services |
Sensonic II |
Heating |
Viterra sensonic II |
2.1.021 |
Watt Industries |
Camical CAM2BPHC-2F |
Heating |
Generic Heating |
2.7.211 (tu) |
WDV/Molliné |
Energy-Int 8 |
Heating |
Hydrometer Sharky BR773 |
2.6.202 (tu) |
Zenner |
Multidata S1 |
Heating |
Zenner |
1.1 |
Total |
194 devices |
|
|
* Devices with pulse inputs can be generally configured as Pulse, Water or Gas counters.
st = Supported with a Standard or Generic Fbox
tu = Tested by user. The device has not been tested by Engiby but a user has reported positive result.
Some users don't care (don't report) about minor errors like 'Missing value'.
do = Based on documentation. According to the manufacturer documentation, the device should work.
We cannot warantee that the provided documents are up to date and match the concerned device.
sa = Included in a free package distributed by Saia-Burgess.
In any cases, changes in the configuration or new firmware version in the device may avoid the reading of some values. This cause usually a 'Missing value' error.
New devices can be tested and implemented on request. At least a documentation describing the M-Bus protocol implementation of the particular device is required.
Depending on complexity, a test device may be required by Engiby. It is important that this device has the definitive configuration.
In many cases, a readout with our tool NG-Mscan2 (see link below) is sufficient.
The implementation is usually done within 2 weeks and the device is returned after positive feedback.
The following list shows level converters (RS232, RS 485, TCP/IP) that have been successfully tested by Engiby.
Manufacturer / Provider | Device | Type | Remarks |
Relay GmbH | PW3 | RS232 | Supports up to 3 M-Bus devices |
Relay GmbH | PW20 | RS232 | Supports up to 20 M-Bus devices |
Relay GmbH | PW60 | RS232 / RS485 | Supports up to 60 M-Bus devices |
Relay GmbH | PW250 | RS232 / TCP/IP | Supports up to 250 M-Bus devices Includes a level converter for RS232 and TCP/IP |
Relay GmbH | MR003 USB | USB |
M-Bus micro master USB |
PiiGAB Processinformation | PiiGAB M-Bus 900 | RS232 / TCP/IP |
Includes a level converter for RS232 and TCP/IP |
elvaco | CMe3100 | TCP/IP |
Supports up to 8 devices |
Further information in relation to M-Bus can be found in the following sections:
- M-Bus FAQ
- M-Bus Startup
- M-Bus Trouble shooting guide
- M-Bus main page with prices
- NG-MScan2 - M-Bus scanner
Last update of this page: 08.12.2023