Dear PCD users,
You are registered as Engiby News reader. To modify your registration please go to www.engiby.ch/news.htm
The Engiby News informs you about new products available at Engiby, new documents on the Internet site and actual development activities.
As promized, this one gives you some news about Engiby Add-On Tools.
Tyco MX Driver
This new communication driver is supported by the Alarm System Add-On tool. The tool is able to read the data point list of the Tyco system configuration and to create a mapping of alarms on PCD Registers or Flags. Even with 1000 detectors, the PCD programming is made in few minutes (you don't need to enter all data points).
Remember that this tool already supports several Siemens/Cerberus systems and the BMA+EMA systems from Securiton.
NG-Dump : Freeware version available.
The NG-Dump is a Windows program created to dump data from a SAIA-PCD system to a CSV-file in a very simple way.
A freeware version is now available on http://www.engiby.ch/ngdump/ngdump.htm
With a pallet of 3 data acquisition tools, Engiby is able to respond to a wide range of requirements in this application field.
Use the following links for more info :
- NG-Trace, the Engiby's
Tracer software
- NG-Data, The Engiby's Data
Acquisition Concept
- Data acquisition with
SAIA-PCD
NG-Trace
Are you also writing empty XOBs to disable the CPU error LED ? Not very
clever !
Or you have put a DIAG instruction. Better ! But have you ever check the
returned data ?
Now you can achieve both in a much more intelligent way : Use the NG-Trace
tool to get a intelligent list of XOB events.
But the scoop is here : this is available with the freeware version !
With the new library of the NG-Trace, you just have to place one Fbox. You can
select yourself in the Fbox the XOB events you want to trace. The Add-On tool
provides you a readable list of XOB events like this :
Click here to download the last Fbox library.
You don't yet have the NG-Trace software ?
Click here to read more about it and don't hesitate to download the freeware version.
Engiby sàrl
Ch. des Fauvettes 3
CH-1580 Avenches
www.engiby.ch
nb@engiby.ch
Engiby, N. Bovigny, 09.05.2003