M-Bus
– List of supported devices
The
M-Bus standard does not ensure that any device can be read with a unique
implementation. The procedure to read the device may vary, different data
coding is used, the delivered data can be specifically configured and some data
coding are even manufacturer specific. Therefore, tests and adaptations might
be necessary for some new devices to be supported by the M-Bus driver.
For
simple application and very standard devices, a set of Standard Fboxes has been
created. If a standard Fbox is sufficient, no specific implementation is
required. For heating and simple water counters, see the Generic Fboxes in the M-Bus
Heating or Water families. For electricity counters see the Standard Fboxes in the M-Bus Electricity family. Please refer
also to the documents listed at the end of this document.
Note
also that some devices from different manufacturers are internally identical.
With a device specification Engiby can check if an existing Fbox can be used.
The
following list, show the devices that have been successfully tested by Engiby
or by integrators.
|
Manufacturer |
Supported devices |
Type * |
Fbox |
Library version |
|
ABB |
Heat counter, SVM
F2 |
Heating |
ABB F2-F4 |
2.0.00 |
|
Actaris / Allmess |
Integral MK MaXX |
Heating |
Actaris MaXX |
2.5.003 |
|
Aquametro |
AMTRON-NW |
Heating |
Amtron N&NW |
2.0.00 |
|
Berg |
Serie BLMi |
Electric |
Berg BLMi |
2.3.105 (tu) |
|
Danfoss |
EEM-C CALStreem |
Heating |
Danfoss EEM-C |
2.0.10 |
|
ELKO |
EIZ-EDW |
Electric |
|
2.1.027 |
|
Elster |
F96 Plus: see
Hydrometer Sharky BR773 |
Heating |
Hydrometer Sharky
BR773 |
2.6.102 (do) |
|
EMH |
DIZ |
Electric |
Standard |
2.5.004 (tu) |
|
EMU |
EMU 32.xx |
Electric |
Standard |
2.5.041 |
|
Finder |
7E.56, 3 phases |
Electric |
Saia AWD |
2.6.123 (do) |
|
GMC |
Electricity,
U1187 / U1189 |
Electric |
GMC U118x |
2.4.034 |
|
GWF |
EnerCal F2 |
Heating |
GWF EnerCal |
2.4.003 |
|
Hydrometer |
Hydrometer Scylar II |
Heating |
Hydrometer Scylar |
2.1.010 |
|
ista |
Sensonic |
Heating |
Heating Generic |
2.5.200 |
|
Janitza |
UMG 96 S |
Electric |
Janitza |
2.6.204 |
|
Kamstrup |
Maxical III |
Heating |
Kamstrup MaxiCal
III |
2.3.105 |
|
Metra |
ERW 700 |
Heating |
Metra ERW 700 |
2.5.215 (tu) |
|
NeoVac |
|
Heating |
NeoVac 431 |
2.1.013 |
|
NZR |
KM |
Electric |
NZR |
2.5.065 (do) |
|
Optec |
Digital 3/5 DT |
Electric |
Standard, Variant
1 |
2.5.041 (st) |
|
Paul Vaucher |
PV Optima |
Heating |
|
2.6.123 (tu) |
|
Relay |
PadPuls M1 |
Pulse |
Relay PadPuls |
2.1.021 |
|
Saia-Burgess |
AWD, 3 phases |
Electric |
Saia AWD |
2.6.123 (sa) |
|
Sappel |
HYDRUS |
Water |
Water Generic |
2.6.123 (tu) |
|
Schlumberger |
CF 50
M-Bus-Interface |
Heating |
Schlumberger
CF 50 |
2.0.00 |
|
Sontex |
502 S and SX850 F |
Heating |
Single value 1-4 |
2.5.209 |
|
Sensus/SPX |
SPX B 501 |
Heating |
Fix Data |
2.3.110 |
|
Siemens / L&G |
Ultraheat / 2WR4 / 2WR5 / 2WR6 |
Heating |
Siemens 2WRx |
2.1.021 |
|
Techem |
Delta-tech Split |
Heating |
Techem Split |
2.0.22 |
|
Viterra Energy Services |
Sensonic II |
Heating |
Viterra sensonic
II |
2.1.021 |
|
WDV/Molliné |
SensoStar |
Heating |
SensoStar |
2.5.014 (do) |
|
Zenner |
Multidata S1 |
Heating |
Zenner |
1.1 |
|
Total |
129 devices |
|
|
*
Devices with pulse inputs can be generally configured as Pulse, Water or Gas
counters.
st = Supported with a Standard or Generic Fbox
tu = Tested by user. The device has not been tested by Engiby but a user has
reported positive result.
do = Based on documentation only. According to the manufacturer documentation,
the device should work.
sa = Included in a free package distributed by Saia-Burgess.
On
request, new devices can be tested and implemented. A test device should be put
at disposal of Engiby with a documentation describing the M-Bus protocol
implementation of the particular device. It is important that this device has
the definitive configuration. The implementation is usually done within 2 weeks
and the device is returned after positive feedback.
See
also:
M-Bus FAQ.
Startup guide
Trouble shooting
Price of licenses and updates
|
Back to Engiby
main page Engiby / 24.04.2013 |