Driver ebmBUS

 

Short description

The ebmBUS Driver supports communication over serial RS485 lines with ebm-Papst motors. The following types are supported:
-
K3G310A                                     - M3G084
-
M3G112                                       - M3G150
- CHW050                                       - CHW070/72/73
- CHG485                                       - CNW015
- CNW030
For other types, please contact Engiby.
The driver is available in form of an Fbox family for Fupla. The PCD is Master and supports the sending of commands and reading back of status and parameters. Direct read and write access to EEPROM registers is also supported.
Because of the slow communication procedure (single values at 9600 bds), you should not plan to connect more than 100 motors per bus (a repeater should be inserted each 32 devices). For instances a PCD3 can handle up to 8 buses in parallel using F2xx modules in slots 0 to 3.

 

Price (March 2012)

License valid for
- PG5 V 1.4.xxx
- PG5 V 2.0.xxx

CHF 2'800.--

Euro

Update to the last version
Update Service

CHF 400.--

Euro

 

Documentation

Manual (Word document) available from each Fbox.
Language : English

Prices are subject to changes at any time without notification.